Showing posts with label drip cap. Show all posts
Showing posts with label drip cap. Show all posts

Tuesday, February 19, 2019

Gameroom French Doors Part 3


Google+ and G+ are going away so you will no longer be notified when I post.  You can follow my blog by using Bloglovin and they will notify you by email when I post.  I am also looking into using feedburner etc. as a means of notification.  Also, Bloglovin has 1000's of blogs so you might find an additional couple of blogs to follow.  Gear Acres is in the DIY/Craft category.  You can only pick one and Decor didn't seem like a good fit.

Actually, I think getting rid of the Google+/G+ will be good.  I have been told that some people wanted to comment and couldn't because they did not want to join G+.  I probably wouldn't want to subscribe and remember yet another password, either.


Gameroom French Doors Part 1 
Gameroom French Doors Part 2


Today we installed a wood threshold that we made to mimic the concrete thresholds on all the original exterior doors. I didn't want to just use the same thickness of board that make up the door trim.  The door trim was made out of a 2X6 that was ripped down to 5 inches wide.  For the threshold we used a 1X6 and a 2X6 screwed together so that the threshold was thicker.  If we had used just a 2X6 it would have looked too picture frame like.
After we finished with the threshold we measured and cut the PVC drip cap for above the door.  All windows and doors need drip cap on top of the top piece of trim.  This piece of trim hangs over the edge of the top trim board and keeps rain water from getting behind your trim and eventually rotting the trim and sheathing which ultimately lets rain water get into your house.


I have been replacing the original wood drip caps, on this house, with the PVC drip caps. Several of the wood drip caps showed the beginning of rot so why not replace now and be better safe than sorry.  It's not a design feature so I am not changing anything aesthetically about the house.  I am though changing to a better performing material that will not rot.

The PVC drip cap in the photo above shows the little groove on the bottom.  The drip cap is attached to the top trim with small finish nails and positioned so the little groove on the bottom sticks out slightly over the trim piece of wood.  The groove works like magic when a slow moving drip wicks around the front edge of the drip cap.  Rather than continuing to wick back towards the wood trim the groove breaks the surface tension and the drip falls off.
  
FYI A good concrete porch with a design where the concrete porch cap has an overhang should also have a groove incised into the underside to eliminate drips from wicking back.  Without that groove the drip continues back and will then leave the sides of your porch wet.  If you have a brick porch and live in cold climate the wet bricks can freeze and crack.  If you already have a porch without the groove you can add the groove by using a grinder with a thin masonry cut off wheel.

Notice the thin white line on top of the top trim board.  That is the drip cap installed.  Barely noticeable but very important to the long term health of my wood trim.

Tomorrow I will cover the new door handle, the install, and why we chose this style, color finish, and what measurement you will need before ordering your door handle.


  We will wait until spring before we install the dummy handle on the right side door because we will need to drill 2 large holes in the same location as the factory holes.  The only difference between the operating door handle and the dummy door handle is that the dummy does not come with a lock set or a door latch.


Winter Outdoor Projects


Hang cedar shingles

Finish adding the 1X4 trim on the peak area on the gable end of the roof
Build and install a replica of the gable vent
Build another 2 sets of shutters

Reuse Repurpose Recycle


Thursday, August 18, 2016

Made the best of a rain delay...

....by going to Home Depot to buy PVC drip cap for the new windows.

Around noon today the sky was perfectly clear and it was HOT. I puttered around the yard while I was waiting for R to get back from his dentist appointment and with gas for the riding lawnmower.  I heard the horn that they blow on the golf course when there is a storm coming and the golfers need to get off the course when I was picking up nails, wood chips, and sweeping up the deck.  I thought "what the heck" and looked up just as the clouds covered the sun and the wind started to blow.
This storm came out of nowhere.  R drove in the driveway just as it started to sprinkle.  Since we couldn't work on the cedar shingles we decided to go to the Home Depot in Fenton to buy the PVC drip cap.   

Home Depot only had 12 footers so we needed to tie the pieces to the truck mirror and tuck the other end in the bed of the truck.  We then picked up a gyro sandwich and an ice capp from Timmy's (Tim Horton's for you non northern people) and headed home.
By the time we arrived home the storm was over but everything was still wet so I couldn't mow and R couldn't use electricity.  We decided we could install the drip cap on the two new windows because we could use our pneumatic nailer and no electricity.

When installing solid PVC trim or boards, always keep the pieces in the shade where it is cool.  The PVC grows when it is hot and if you cut the piece in the heat it will be too short come fall and winter when the PVC contracts because of the colder temperature.  This problem REALLY shows up on wide PVC boards like what we use for the fascia.  We always try to install those pieces in the fall to help eliminate that problem.

We cut the drip caps an 1/8th too long so each end overhung the trim by a 1/16th.  Come winter it will be perfect if anyone even notices....LOL
R used the air nailer with brads to attach the drip cap to the window trim.
I just noticed that you can see my reflection in the window.  There goes the anonymity....LOL 

You can read about the how and why of drip cap installation here.

I am going to mow in the morning while R has a root canal.  I think I got the better deal.  Root canal...ouch.  If he feels better later in the afternoon we will start re shingling around the windows. 

Today's storm knocked over a dead tree onto the power lines just down the street.  I saw the power company's trucks when I drove uptown.  We didn't lose power until they shut the power off to remove the tree.  So rather than relax or take a nap while I waited for the power to return, I instead doodled my fall design for the front door and front porch.  Doodled is a stretch, it is more like scribbles.  I'm not even sure I understand the drawing.

Now for the gratuitous kitty photos.
Elvis loves watching the bird feeder.  
His sister, Sasha, says "stupid brother, you are too close." 
"huh?"
"Is this better?"

Reuse Repurpose Recycle