B & G stained the deck boards last week and it looks great. Several days ago we installed the wider rim joist to hide the original narrow rim joist. We countersunk a 1/2" diameter hole a 1/2" deep before installing long deck screws to hold the rim joist in place. After we installed the long deck screws we inserted a 1/2" cap plug into the hole but not before squeezing a little wood glue into the hole. I think this looks more finished than just installing screws and having the screw head exposed.
The photo below is of R doing his imitation of a clamp by standing on the end of a board while G cuts a new stringer.
I just noticed that R has on those shorts again!!!
The deck sure looks good. Anxious to see it when it is done.
ReplyDelete